Heating & Cooling

Thermostat Installation in Memphis, TN

A thermostat controls your whole system. We install and set up programmable and smart models and make sure they work with your equipment.

The thermostat is the brain of your heating and cooling system. It senses the temperature, tells the equipment when to run and switches between heat and cool. An old thermostat that reads inaccurately can cause short cycling, uneven comfort and wasted energy. A new one can give you better control and schedules that match your day.

Not every thermostat works with every system. Single-stage and multi-stage equipment, heat pumps, dual-fuel setups, zoned systems and variable-speed units each need specific wiring and settings. Many modern smart thermostats also need a common wire, called a C-wire, to power the screen and Wi-Fi. If your home does not have one, we look at the options for adding a wire or using an adapter. Choosing the wrong model or connecting it incorrectly can cause the system to misbehave or even damage the equipment.

We select a thermostat that matches your equipment, install it, wire it correctly, set the system type and configure it for how your home operates. For a heat pump, that includes the reversing valve and auxiliary heat settings. We then walk you through the schedule, the app if the model has one and any energy-saving features. If the thermostat is not the problem, we say so, because sometimes a thermostat complaint is really a duct, filter or equipment issue.

Signs you need a new thermostat

  • The temperature in the house does not match what the thermostat shows.
  • The system does not respond, or turns on and off at odd times.
  • The screen is blank, dim or unreadable, even with fresh batteries.
  • Your thermostat is old and you want a schedule or phone control.
  • You have a heat pump or dual-fuel system and your current thermostat is not set up for it.
  • You want better control of rooms or zones in the house.

How a visit goes

  1. Check the current setupWe look at your equipment type, the existing wires and the thermostat location, and confirm the problem is the thermostat and not another part of the system.
  2. Choose a compatible modelWe explain the features you can choose from, such as scheduling, Wi-Fi and humidity control, and select a model that works with your system.
  3. Install and configureWe power down the system, wire the new thermostat, mount it and set the system type, stages and heat pump options so it matches your equipment.
  4. Test and teachWe run heating and cooling to confirm the thermostat controls the system correctly and show you how to set schedules and use the app or controls.

Questions we hear

Do I need a smart thermostat?

Not necessarily. A basic programmable model works well for many homes. A smart thermostat adds phone control, reminders and learning features. We explain the differences so you pick what suits you.

Will a new thermostat work with my system?

Most will, but compatibility depends on your equipment and wiring. We check before we install, and we set the thermostat for your system type so it controls the right stages.

What is a C-wire and do I need one?

A C-wire is a common wire that gives a thermostat continuous power. Many smart models need it. If your wall does not have one, we explain the options for adding one or using a compatible workaround.

Why does my thermostat show the wrong temperature?

It may be in a poor location, such as direct sun or near a vent, or the sensor may be failing. It can also be a sign of a different problem in the system. We check before replacing it.

Can you install a thermostat I bought myself?

Often yes. Tell us the make and model when you call so we can check that it fits your system.

Send us a request

Tell us what is going on and we will get back to you.

Based in Cordova, TN 38018.

Request an estimate

What do you need?
Call nowRequest an estimate