A standard 120-volt outlet adds only a few miles of range per hour. A Level 2 charger uses a 240-volt circuit, like an electric dryer or oven, and charges many times faster. It is the setup most EV owners choose for home.
The work starts at the panel. A charger can draw a lot of power for hours at a time, so we check that your panel and service can handle it. We do a load calculation. If your panel has room, we add a dedicated breaker and run cable to the charger location. If it does not, we talk through your options, which may include a panel upgrade or a load management device that shares capacity with other large loads.
You can choose a plug-in or hardwired setup. A plug-in charger uses a 240-volt outlet, often a NEMA 14-50, and is easy to move. A hardwired charger connects directly to the circuit and can supply more current. We install either type, mount it in your garage, carport or on an outside wall, and use weather-rated parts and GFCI protection where code requires. We follow the charger manufacturer instructions for the breaker and wire size.
Signs a home EV charger makes sense
- You own or are buying an electric or plug-in hybrid vehicle.
- A regular outlet charges too slowly for your daily driving.
- You want to start every morning with a full battery.
- You already have an extension cord running to the car.
- You want the charger on a timer or on a smart app.
- You are not sure your panel can handle another large load.
How a visit goes
- We check your panel and the locationWe look at your panel, available capacity and the distance from the panel to where you park. We also ask about your vehicle and the charger you have in mind.
- We plan the circuit and permitsWe determine the breaker and cable size, decide on plug-in or hardwired and file for the permit where one is required.
- We run the circuit and install the chargerWe install the breaker, run cable through walls, attic or conduit, mount the charger or outlet and connect everything with tight, labeled connections.
- We test and show you how to use itWe test the circuit and the charger, arrange the inspection and show you how to set up the charger and start your first charge.
Questions we hear
Can my panel handle an EV charger?
It depends on the size of your service and what else is on it. We do a load calculation to find out. If capacity is limited, a load management device or a panel upgrade can solve it.
Do I need a permit?
In most cases yes, where required. A new 240-volt circuit is usually permitted work, and we handle the permit and the inspection.
Which charger should I buy?
Any Level 2 charger from a reputable maker that is listed for use in the US can work. We can install the one you choose, or help you compare features such as plug-in versus hardwired, cord length and smart controls.
Can you install it outdoors?
Yes. Outdoor installations use weather-rated enclosures and wiring methods, and chargers rated for outdoor use. Tell us where you park and we will plan the route.