Electrical repair is troubleshooting first and fixing second. A tripped breaker or a dead outlet is only a symptom. The real cause might be a loose connection, a worn device, a damaged cable, an overloaded circuit or a failing breaker. If we only replace the part that stopped working, the problem usually comes back.
We trace the circuit, test it with meters and check the connections at the outlet, the switch, the junction box and the panel. Then we tell you what we found. Some repairs are small, such as replacing a worn receptacle or a loose wire nut. Others mean replacing a section of cable, adding a circuit or swapping a breaker that no longer holds up.
Every repair is done to current code, and we use parts that match the circuit. That means the right breaker size for the wire, GFCI and AFCI protection where the code calls for it, and connections that are tight and clean. Where a permit is required, we handle it.
Signs you need electrical repair
- A breaker trips repeatedly or will not reset.
- An outlet or switch has stopped working, or only works when you wiggle the plug.
- Lights flicker, buzz or dim when something else turns on.
- A switch plate or outlet feels warm, or you notice a burning or fishy smell.
- You see scorch marks, melted plastic or discoloration around a device.
- You get a small shock when you touch an appliance or a switch.
How a visit goes
- You tell us what is happeningWe ask what you noticed, where it happens and when it started. Details such as "only when the microwave runs" help us narrow the cause quickly.
- We test and find the causeWe check the breaker, the wiring path and the devices on the circuit. We use testers and meters, not guesswork, and we open boxes to see the connections.
- We explain the optionsBefore we repair anything, we show you what failed and what the repair involves. If there is more than one way to fix it, we tell you the difference.
- We repair, test and clean upWe make the repair, test the circuit under load, confirm that protection devices work and leave the area clean. We note anything else we saw that deserves attention later.
Questions we hear
Is a breaker that keeps tripping dangerous?
A breaker trips to protect the wiring from too much current. Resetting it again and again does not fix the cause. It can be an overloaded circuit, a short or a failing breaker. If it trips repeatedly, leave it off and have it checked.
Why does only part of my house have no power?
Often a breaker has tripped or a connection has failed on one circuit. Sometimes a GFCI outlet in a bathroom, garage or kitchen has tripped and feeds other outlets. Check for a tripped GFCI first. If the reset button does nothing, call us.
Can I keep using an outlet that is warm?
No. A warm outlet or plug often means a loose connection or an overloaded circuit, and heat is how electrical fires start. Unplug what you can, stop using that outlet and have it looked at.
Will you tell me if something else needs attention?
Yes. If we see something unsafe while we are there, such as a double-tapped breaker or damaged cable, we point it out and explain it. You decide what to do next.