Swapping a fixture sounds simple, and sometimes it is. But the box has to be rated to hold the fixture, the wiring has to be in good shape and the wattage has to suit the circuit. Heavy chandeliers need a box that is anchored properly, and bathroom and outdoor fixtures need the right moisture rating.
We install ceiling and wall fixtures, chandeliers, pendants, vanity lights, recessed lights, track lighting, under-cabinet lights, porch and landscape lighting, and motion or photocell controls. For recessed lights, we plan the layout so the room is evenly lit, then cut in the cans, run the cable and keep clearances around insulation where the product requires it.
Control matters as much as the fixture. We can add dimmers, three-way switches so a light can be operated from two places, and smart switches. If you are changing to LED, we match dimmers to the bulbs so they do not flicker or hum. We also help you choose color temperature so the room feels the way you want.
Signs it is time for new lighting
- Rooms feel dark, or you have shadows where you need light to work.
- Fixtures are dated, broken or hard to keep clean.
- Bulbs burn out quickly, or LED bulbs flicker on a dimmer.
- You want a light controlled from two doors, or from your phone.
- Outdoor areas, steps, driveways or porches are too dark at night.
- You are remodeling a kitchen, bath or basement and need a new lighting plan.
How a visit goes
- We plan the lightingWe walk the space with you and talk about what you do in each room. Then we decide fixture types, locations, switch positions and what wiring is already in place.
- We check the box and wiringWe confirm the existing box can carry the fixture, that the wire is in good condition and that the circuit has room for the added load.
- We install and connectWe turn off power at the panel, mount the fixtures, make the connections, install new switches or dimmers and seal anything exposed to weather or moisture.
- We test and adjustWe switch every light on, check the dimmer range, confirm that nothing flickers or overheats and show you how the controls work.
Questions we hear
Can you install fixtures I bought myself?
Yes, as long as they are listed for the use and location. We check the fixture before we hang it. If it is not rated for a damp area or is too heavy for the box, we tell you before starting.
Can you add recessed lighting in a finished ceiling?
In many cases, yes. We cut holes, fish the cable through the ceiling and use remodel cans designed for that. Attic access and insulation affect how easy it is, so we look at it first.
Why do my LED bulbs flicker on the dimmer?
Many older dimmers were made for incandescent bulbs. LED bulbs need a dimmer rated for low loads and matched to the bulb. Changing the dimmer usually solves the flicker.
Do you do outdoor and landscape lighting?
Yes. We install porch, security and pathway lighting, with weather-rated fixtures, GFCI-protected circuits and controls such as timers, photocells and motion sensors.