A whole-house, or standby, generator sits outside your home on a pad, like an air conditioning unit. When the utility power fails, an automatic transfer switch detects it, starts the generator and moves your house to generator power. When utility power returns, it switches back and shuts the generator down. You do not need to go outside in a storm.
Most standby generators run on natural gas or propane. That means the installation involves both electrical work and gas piping, and we do both under our Tennessee contractor license. The generator needs a gas line sized for its demand, an electrical connection through the transfer switch and a level pad placed at the clearances the manufacturer and code require from windows, doors and property lines.
Sizing is the most important decision. We list what you want to power, such as the refrigerator, lights, HVAC, well pump, sump pump and medical equipment, and do a load calculation. You can power the whole house, or choose a smaller unit with a load management system that shares power between large appliances. We explain the tradeoffs, and you decide.
Signs a standby generator makes sense
- Storms or outages leave you without power for long stretches.
- You depend on medical equipment, a sump pump or a well pump.
- Food in the refrigerator and freezer is at risk during outages.
- You work from home and need internet, lights and cooling to stay on.
- You use a portable generator and are tired of the fuel, noise and extension cords.
- You want power restored automatically while you are away.
How a visit goes
- We size the generatorWe review your panel, appliances and priorities, run a load calculation and recommend a generator size. We also look at where it can go on your property.
- We plan the site, fuel and permitsWe choose the pad location, check clearances and confirm gas supply. We file for permits where required and coordinate with the utility on gas service if needed.
- We install the pad, generator and transfer switchWe set the pad, place the generator, run the gas line, install the automatic transfer switch and connect everything to your electrical system.
- We start it up and train youWe start and test the generator, simulate an outage to check the transfer, arrange the inspection and show you how it works and what maintenance it needs.
Questions we hear
Can a generator power my whole house, including the AC?
It can if the unit is sized for it. Air conditioners need a lot of starting power. We include your HVAC in the load calculation, and if a smaller unit is chosen, we can add load management so it shares power.
Natural gas or propane?
Natural gas comes from the utility line and does not need refilling, if gas service is available at your home. Propane is stored in a tank on your property. We help you pick based on what is available to you.
Does a standby generator need maintenance?
Yes. Generators need periodic service, such as oil and filter changes and battery checks, following the manufacturer schedule. They also run a short self-test on a regular basis.
Do I need a permit?
Yes, where required. Installing a generator usually involves electrical, gas and sometimes zoning requirements. We handle the permits and inspections as part of the job.