Heating & Cooling

Ductless Mini-Split Installation in Memphis, TN

Heating and cooling for rooms that ducts do not reach, installed neatly with a small outdoor unit and a quiet wall unit inside.

A ductless mini-split is a heat pump with a separate indoor unit that mounts on the wall or ceiling, connected to an outdoor unit by a small bundle of refrigerant line, power and drain. Because no ducts are needed, it can heat and cool a room without opening walls or building a duct run. Each indoor unit has its own thermostat control, so you only condition the spaces you are using.

Mini-splits are a practical answer to several common problems. They work well in room additions, converted garages, sunrooms, bonus rooms over a garage, finished attics and older homes that never had ducts. They can also fix a room that stays too hot or cold because the existing system cannot reach it. A single outdoor unit can serve one indoor unit or several, depending on the setup, so a multi-zone system can cover different rooms with separate control.

Placement and sizing decide whether a mini-split performs well. We look at the room size, windows, sun exposure and where air will flow, then choose where the indoor unit should go for even comfort and a clean look. We also plan the line route, the condensate drain and the electrical supply. We install Carrier, Bryant and Goodman equipment, and we explain manufacturer warranty terms for what you choose, since they vary by product and registration.

When a mini-split makes sense

  • You added a room, garage conversion or sunroom that your ducts do not reach.
  • One room is always too hot or too cold compared with the rest of the house.
  • Your home has no ducts, or the ducts are damaged or too costly to repair.
  • You want separate temperature control for a bedroom, office or workshop.
  • You want to cool a space without running the whole house system.
  • Your window unit or space heater is noisy, inefficient or taking up a window.

How a visit goes

  1. Review the spaceWe look at the room, how it is used, the sun and the walls, and decide where the indoor and outdoor units should go. We also check the electrical supply.
  2. Choose the systemWe explain single-zone and multi-zone options, the size that fits the space and what each choice means for comfort and operation. You can ask questions before deciding.
  3. InstallWe mount the indoor unit, set the outdoor unit on a pad or bracket, run the line set and drain, make the electrical connection and seal the wall opening.
  4. Test and trainWe evacuate and test the system, confirm it heats and cools correctly and show you how to use the remote, set modes and clean the washable filter.

Questions we hear

Can a mini-split both heat and cool?

Yes. Most mini-splits are heat pumps, so they cool in summer and heat in cooler months. In very cold weather their heating output drops, so we discuss how you plan to use the space.

How many rooms can one mini-split cover?

A single indoor unit serves one open space well. A multi-zone outdoor unit can feed several indoor units, each with its own control. We look at your layout to recommend the right setup.

Is a mini-split loud?

Modern indoor units are quiet, and many people notice only a soft fan sound. The outdoor unit also runs quietly compared with older equipment. Placement matters, so we consider bedrooms and neighbors when choosing the spot.

How do I maintain a mini-split?

Clean the washable filters on the indoor unit regularly, keep the outdoor unit clear of leaves and debris, and have the system inspected on a regular schedule. The coil and drain need periodic cleaning too.

What does the manufacturer warranty cover?

Manufacturer warranties vary by brand and model. We explain what applies to the unit you choose before installation.

Send us a request

Tell us what is going on and we will get back to you.

Based in Cordova, TN 38018.

Request an estimate

What do you need?
Call nowRequest an estimate