A toilet has only a few moving parts, and most problems come from those parts. Inside the tank, the fill valve lets water in and the flapper lets it drain into the bowl. When the flapper stops sealing or the fill valve stops shutting off, water keeps running and your water bill goes up. Replacing those parts is a small repair that often fixes the problem for good.
Other problems start at the floor. A toilet is held to the drain by a wax ring or similar seal and sits on a flange fastened to the floor. If the seal fails or the flange is damaged, water can leak around the base and soak the subfloor, often without much warning. A rocking toilet is a sign that something under it needs attention.
Clogs that come back usually mean a problem further down the line, not just the toilet itself. If more than one drain in the house is slow, the issue may be in the main drain, and we can look into that. When a toilet is cracked, constantly clogging, or too old to be worth repairing, we can replace it. We help you pick a size and style that fits your bathroom and set it level on a new seal.
Signs your toilet needs repair or replacement
- The toilet runs on its own, hisses or refills every so often with no one using it.
- It rocks or shifts when you sit, or the base is loose on the floor.
- You see water, stains or soft flooring around the base.
- The handle is loose, sticks or has to be held down to flush.
- It clogs often or flushes weakly even with nothing unusual going down.
- You see cracks in the bowl or tank, or a slow water loss from a hairline crack.
How a visit goes
- Find the causeWe check the tank parts, supply line, shutoff valve, base seal and floor condition. A dye tablet in the tank is a simple way to confirm whether water is leaking past the flapper.
- Explain repair or replaceWe tell you whether new internal parts, a new seal or a new toilet makes sense. If a repair will not hold, we say so and show you the replacement options.
- Do the workFor a repair, we swap the worn parts and test the flush. For a replacement or reset, we shut off the water, remove the old toilet, check the flange, install a new seal, set the toilet level and secure it.
- Test and clean upWe check for leaks at the supply line and base, test several flushes, adjust the water level and take the old parts with us.
Questions we hear
Why does my toilet keep running?
Most often the flapper is worn or not sealing, or the fill valve does not shut off at the right level. Both are inexpensive parts to replace, and we can swap them during one visit.
My toilet rocks. Is that serious?
It can be. A rocking toilet may have a failed seal, loose bolts or a damaged flange, and water can leak into the floor below. We check the floor as well as the toilet.
Is it better to repair or replace an old toilet?
If the porcelain is sound and only the parts are worn, repair usually makes sense. If it is cracked, clogs constantly, or needs repeated repairs, replacing it is often the better choice.
Can you install a toilet I bought myself?
Yes, in most cases. Bring the model information when you call so we can check that it fits the space and the drain layout.
What if the clog keeps coming back?
We check whether the cause is the toilet or the drain line behind it. If the line is the problem, drain cleaning or a camera inspection can find out why.